Compared with the previous generation power supply P2408, the biggest change of P2408S is its rich expandability. It adds a battery fast charging board, battery cycle calibration, and current pointer meter function modules.

Let's review whether the soldering iron tip is used to iron hot melts such as plastics, glues, films, etc., so that the tin originally hanging on the soldering iron tip slips off, thus causing the soldering iron tip to be oxidized. If there is no tin, we will energize the soldering iron head for a period of time to melt the hot melt with a higher temperature, and then remove the hot melt on the soldering iron head with a wet sponge.

The "Old-for-New" campaign is coming! Redeem AiXun T420D dual-station intelligent soldering station, up to $60

The soldering station is an upgraded version of the basic soldering iron. If you use a soldering iron a lot or have a lot of soldering projects, we recommend this soldering station instead of a soldering iron.

Whether you work in a repair shop, research and design, or a hobbyist, you should gain reliable service from a branded soldering station under normal use. You may need to replace consumables like tips, heating elements, and even soldering iron handles while soldering, but the body of a good soldering station should last for years. There are several well-known brands of soldering stations - including Weller, AiXun (available on this site), Pace, JBC, Goot, and Hakko - that offer quality lead-free soldering stations.

AiXunP2408S intelligent regulated power supply upgrade, with battery fast charging, constant current output, short-circuit automatic protection and new operation interface functions, support 11-13 full series battery charge and discharge cycle test calibration, built-in APP for battery calibration. Support battery expansion, one Key expansion, prolong battery life.

Best Soldering Accessories: Soldering Preheater Soldering Magnifier Tweezers Soldering Iron Tip Cleaner (Brass Hair) Wire Cutter...

Temperature display flickering check 1: The new soldering pen will have a similar phenomenon - the soldering pen can be checked after using it for a period of time 2: Is the iron wire damaged? - Check the iron assembly wire inspection 3: Are the solder joints too large? - Use a higher power soldering station or keep using it.