If you've recently acquired the AiXun T3A Smart Soldering Station, congratulations on your investment in an innovative and efficient soldering tool. To make the most of this equipment, it's essential to understand its operation and maintenance. In this article, we will walk you through the step-by-step process of using the AiXun T3A Smart Soldering Station and provide some valuable tips for maintenance.
Step 1: Preheating and Power On
Begin by plugging in the soldering station and connecting it to the power supply. Turn on the power of the soldering station.
Step 2: Temperature Adjustment
Set the temperature to your desired level. Keep in mind that the temperature of the soldering iron tip may vary for different models. Calibration is recommended for precise temperature adjustment, or you can use the temperature control knob for adjustment.
Step 3: Tip Maintenance
To prolong the service life of the soldering iron tip, it's a good practice to use solder to clean it.
Step 4: Soldering
Once the solder reaches the desired temperature, you can start soldering. Ensure that the solder paste wire melts effectively at the set temperature.
Step 5: Cleaning
Clean the impurities on the tip of the soldering iron by wiping it on a soaked sponge.
Step 6: Power Off and Storage
When the soldering station is not in use, turn it off and allow it to cool. Once the soldering iron tip has cooled down, store it safely.
1. Set the temperature to 250 degrees Celsius (482 degrees Fahrenheit) for cleaning and maintenance purposes.
2. After the temperature stabilizes, use a cleaning sponge to clean the soldering head and inspect the soldering iron's condition.
3. If the soldering iron tip has black oxide on its tin-plated part, you can replate it with a new layer of tin and then wipe it clean with a sponge. Repeat this process until all oxide is removed.
4. If the soldering iron tip is deformed or rusted, it should be replaced with a new one.
5. Proper daily maintenance is crucial to prevent the soldering iron tip from losing its tinning and can significantly extend its lifespan.
Here's what you'll find in the AiXun T3A Smart Soldering Station package:
The AiXun T3A is the world's first 200W fully intelligent soldering station. It's compatible with T12/936/T245 three handles and can be used in various scenarios. Thanks to its smart temperature control system, it can heat up to 380℃ within 3 seconds with a temperature accuracy deviation of less than 1%. This makes it ideal for mobile maintenance and precision welding of high-end electronic products.
The 2.4-inch LCD digital color display enhances your visual experience, contributing to improved work efficiency. Additionally, the smart operator habit memory helps prolong the service life of both the welding station and soldering tips.
In summary, the AiXun T3A Smart Soldering Station is a must-have tool, especially for cellphone repair shops and anyone who values efficient and precise soldering. Invest a soldering station to elevate your soldering capabilities and enhance your workmanship.