AiXun T3A soldering station Precautions For Use

AiXun T3A soldering station Precautions For Use:

In order to avoid damage to the soldering station. and the safety of the working environment, the following points should be observed:

A. Do not use the DC power connector that comes with the soldering station at the same time as welding.

B.This product uses a three-wire grounding plug, must be inserted into the three-hole grounding socket , do not change the plug or use an ungrounded three-pronged adaptor that may cause poor grounding. If a longer cord is required, use a grounded 3-wire power cord. Do not modify the soldering station without authorization.

C. When replacing parts, use original factory parts.

D. Do not get the soldering station wet, do not use the station when your hands are wet, and do not pull the power cord. The work environment should be well ventilated as it will emit smoke when welding.

E. Do not do anything that may harm the product when using the soldering station.

F. If the product is not used for a long time, please store it in a dry environment.

Precautions for using the soldering iron tip of the AiXun T3A soldering station

When the power is turned on, the soldering iron tip is at a high temperature and since misuse may cause burns or fire hazards, please strictly observe the following:

A. Please avoid misuse of the soldering station and use the product in accordance with the operating instructions.

B. Do not touch the metal part near the tip of the soldering iron.

C. Do not use the soldering iron near flammable objects.

D. Inform other persons that the tip of the soldering iron is highly susceptible to burns and may cause dangerous accidents. The power should be turned off when resting or after finishing.

E.Do not touch the soldering iron tip directly with your hands to prevent burns.

F.Do not tap the soldering iron on the table to remove flux residue as this may seriously damage the iron.

H.Do not use the soldering iron tip for anything other than soldering.

AiXun T3A is the world's first 200w fully intelligent soldering station. Compatible with T12/936/T245 three handles, suitable for various scenarios.With intelligent temperature control system, it can quickly heat up to 380℃ in 3 seconds, and the temperature accuracy deviation is less than 1%, which is most suitable for mobile maintenance and precision welding of high-end electronic products. 2.4" LCD digital colour display for better visual enjoyment and to help you work more efficiently. Intelligent operating habit memory can help extend the life of the soldering station and soldering tips. This is a must-have soldering station, especially for cell phone repair stores.