When you decide which rework station to use, you need to consider the difference between a hot air rework station and a desoldering station. While the differences between the two types of rework stations are not immediately obvious, you need to consider your needs and budget before deciding which one to use, as well as a solid understanding of how each one works.
Hot Air Rework Stations are great for small soldering done quickly. The hot air gun that comes with the hot air rework station can melt the solder and remove the components that need to be repaired, it is very suitable for the disassembly of the components on the circuit board, it can save you a lot of time and existing solder and parts that would otherwise be Discarded with the circuit board. Another benefit of using a hot air rework station is that it doubles as a soldering station, which means you can desolder a resistor and then solder a new one right away, saving you time.
The disadvantage of using a hot air rework station is that it is much more expensive than a desoldering station. Hot air rework stations are also very large and difficult to move, so you need to bring your work with you to the rework station, which can be problematic in some cases.
Desoldering stations are versatile; some include a vacuum pump, allowing you to desolder precisely anywhere. Desoldering stations are also easier to clean than hot air rework stations due to smaller parts. Desoldering stations are powerful but have fewer buttons and nozzles than hot air rework stations. On the downside, there is a greater risk of voltage leakage damage when using a desoldering station.
The most significant benefit of choosing a desoldering station is its cost: You can save over $200 or so by choosing a desoldering station. Also, desoldering stations are easier to move than hot air units. If you're only using a soldering iron and a desoldering station - then a desoldering station is the best option, and if you really want to use all its extras, a hot air rework station is probably better for you.
After selecting the type of soldering stations, our next step is to choose a desoldering station. If you want to have a good quality soldering station, the brand is also very important. Like the better brand JBC ,AiXun, Weller in the market... A good brand not only has better quality of soldering stations, but also has guaranteed after-sales.
WhatsApp